The Erdé PM310/1R Single Motor Bike Trailer, maximum load up to 240kg

erd-pm310-single-motor-bike-trailer-64-p

The Erdé PM310/1R Single Motor Bike Trailer

* Please ring for prices * Mike on 07860 452421 

Please note no loading ramp supplied.

* Load Ramp extra *

* Reinforced Load Ramp extra *

 

Description

The Erdé PM310/1R Single Motor Bike Trailer is able to carry a single motorbike up to a maximum weight of 240kg. Designed with a low ground clearance of just 38cm gives the trailer a low centre of gravity, allowing for easier loading and making the trailer very stable when towing.

For ease of use the centre section of the light board that holds the number, folds down allowing the loading ramp (supplied separately) to be fitted. The trailer also features 6 integrated securing loops so that you can safely strap your bike to the trailer.

As with all Erdé trailers the PM310 Single Motor Bike Trailer meets and exceeds the new type approval legislation being enforced as of October 2012. As a result each trailer produced to these standards has to be supplied with a Certificate of Conformity, an example of this certificate is included with the trailer images above.

Also available is a comprehensive range of accessories to further increase the versatility of each Erdé trailer, see below for a full list of accessories suitable for this trailer. Handle bar straps and a loading ramp are highly recommended, as is a spare wheel and support.

TECHNICAL SPECIFICATIONS:

Gross Weight – 300kg

Unladen Weight – 60kg

Axle Rated – 300kg

Internal Dimensions – 200x112cm

Overall Dimensions – 245x145x78cm

 

The Erdé CH751 Motor Bike Trailer, Multi Purpose Chassis, maximum load 624kg

Erdé CH751 Motor Bike Trailer

The Erdé CH751 Motor Bike Trailer

Multi Purpose Chassis

* Please ring for prices * Mike on 07860 452421 

Collection only from our Bungay Base.

 

Description

The Erdé CH751 Multi Purpose Chassis is a wider version of the previous CH451 trailer with greater weight capacity and has many options to tailor it to your exact needs. Popular combinations include fitting loading rails to normally carry one or two motor bikes, a plyboard base to create a flat bed trailer and the Erdé quad pack allowing a quad bike to be transported.

The trailer has a load capacity of 624kg and has a ground clearance of 40cm to give the trailer a low centre of gravity, allowing for easier loading and making the trailer very stable when towing. Recessed light clusters, a feature on all Erdé trailers allow for a high level of protection against damage.

As with all Erdé trailers the CH751 Multi Purpose Chassis meets and exceeds the new type approval legislation being enforced as of October 2012. As a result each trailer produced to these standards has to be supplied with a Certificate of Conformity, an example of this certificate is included with the trailer images above.

The trailer is supplied as a rolling chassis and loading rails etc. are supplied separately as part of the comprehensive range of accessories to further increase the versatility of each Erdé trailer, see below for a full list of accessories suitable for this trailer.

TECHNICAL SPECIFICATIONS

Gross Weight – 750kg

Unladen Weight – 126kg

Axle Rated – 750kg

Internal Dimensions – 200x142cm

Overall Dimensions – 306x186x70cm

Wheel Size – RS145R13

Ground Clearance – 40cm

 

PRO – DRIVER TRAINING orders another bespoke trailer from DanHIRE

Bespoke Trailer from DanHIRE

bespoke trailer

Mark Daniels  Service Director of DanHIRE TRAILER SALES  handing over another bespoke trailer to Charles Neesham, Director of Training at PRO – DRIVER TRAINING based in Lowestoft.

bespoke trailer

This is the second bespoke trailer to have been designed and assembled by DanHIRE with a Higher Frame and Cover.

PRO-DRIVER-TRAINING-danhire-trailers

Daxara 127.2 Trailer: is a basic, ultra compact and robust trailer

daxara-127.2-trailer-137-p

Daxara 127.2 Trailer

* Please ring for prices * Mike on 07860 452421 

Description

The Daxara 127.2 Trailer is a basic, ultra compact and robust trailer. It is constructed from galvanised steel for strength and longevity and has a gross weight capacity of 400kg.

It is perfect for camping trips as well as trips to take domestic waste etc to the local tip and other such activities. As with all the Daxara trailers the rear panel/tailgate is removeable and along with the tipping feature allows for easier unloading of materials such as sand, gravel and earth.

Another useful feature is the recessed lights on the back of the trailer which as well as protecting the lights from getting damaged, allows the trailer to be store on its end, thus taking up far less space when not in use.

The versatility of this robust trailer can be further enhanced by adding any of the accessories shown below. Buying a spare wheel and spare wheel support should be seriously considered when buying a trailer, especially if you intend to use the trailer on long journeys.

Finally, the 127.2 box trailer as with all Daxara trailers meets and exceeds the new type approval legislation being enforced as of October 2012. As a result each trailer produced to these standards has to be supplied with a Certificate of Conformity, an example of this certificate is included with the trailer images above.

Technical Specification:
Overall dimensions: 195 x 130 x 82cm (LxWxH)
Internal box dimensions: 120 x 92 x 35cm (LxWxH)
External box dimensions: 125 x 97 x 41cm (LxWxH)

Wheel size: 400 x 10 inch
Suspension: Torsion

Unladen Weight: 65kg
Gross weight: 400kg

Awards: TV approved, meets and exceeds the new Trailer Type Approval legislation being enforced as of October 2012.

 

Daxara 158.4 Trailer is the entry level model in the recommended for regular use category

daxara-158.4-trailer

Daxara 158.4 Trailer

* Please ring for prices * Mike on 07860 452421 

Description

The Daxara 158.4 Trailer is the entry level model in the recommended for regular use category and the first to feature an ‘A’ frame drawbar and 13 inch wheels. It is constructed from galvanised steel for strength and longevity and has a gross weight capacity of 650kg.

The reinforced ‘A’ frame and double skin side panels further increase the robustness of the trailer and make it durable enough for more regular commercial use. As with all the Daxara trailers the rear panel/tailgate is removeable and along with the tipping feature allows for easier unloading of materials such as sand, gravel and earth. In addition to this the front panel opens and can also be removed on the Daxara 158.4 trailer.

Another useful feature is the recessed lights on the back of the trailer which as well as protecting the lights from getting damaged, allows the trailer to be store on its end, thus taking up far less space when not in use.

The versatility of this great trailer can be further enhanced by adding any of the accessories shown below. Buying a spare wheel and spare wheel support should be seriously considered when buying a trailer, especially if you intend to use the trailer on long journeys.

Finally, the 158.4 box trailer as with all Daxara trailers meets and exceeds the new type approval legislation being enforced as of October 2012. As a result each trailer produced to these standards has to be supplied with a Certificate of Conformity, an example of this certificate is included with the trailer images above.

Technical Specification:
Overall dimensions: 229 x 140 x 94cm (LxWxH)
Internal box dimensions: 144 x 99 x 40cm (LxWxH)
External box dimensions: 149 x 104 x 48cm (LxWxH)

Wheel size: 135 R13 inch
Suspension: Torsion

Unladen Weight: 134kg
Gross weight: 650kg

Awards: TV approved, meets and exceeds the new Trailer Type Approval legislation being enforced as of October 2012.

 

Daxara 198.4 Trailer, robust commercial use trailer, with ‘A’ frame drawbar

daxara-198.4-trailer

Daxara 198.4 Trailer

* Please ring for prices * Mike on 07860 452421 

Description

The Daxara 198.4 Trailer is the next model up from the Daxara 168.4 trailer with an extra 12 inches of useable space and still features the reinforced ‘A’ frame drawbar and 13 inch wheels. It is constructed from galvanised steel for strength and longevity and has a gross weight capacity of 750kg.

The reinforced ‘A’ frame and double skin side panels further increase the robustness of the trailer and make it durable enough for more regular commercial use. As with all the Daxara trailers the rear panel/tailgate is removeable and along with the tipping feature allows for easier unloading of materials such as sand, gravel and earth. In addition to this the front panel opens and can also be removed on the Daxara 198.4 trailer.

Another useful feature is the recessed lights on the back of the trailer which help protect the lights from getting knocked and damaged.

The versatility of this great trailer can be further enhanced by adding any of the accessories shown below. Buying a spare wheel and spare wheel support should be seriously considered when buying a trailer, especially if you intend to use the trailer on long journeys.

Finally, the 198.4 box trailer as with all Daxara trailers meets and exceeds the new type approval legislation being enforced as of October 2012. As a result each trailer produced to these standards has to be supplied with a Certificate of Conformity, an example of this certificate is included with the trailer images above.

Technical Specification:
Overall dimensions: 280 x 160 x 96cm (LxWxH)
Internal box dimensions: 185 x 115 x 40cm (LxWxH)
External box dimensions: 191 x 121 x 48cm (LxWxH)

Wheel size: 145 R13 inch
Suspension: Torsion

Unladen Weight: 182kg
Gross weight: 750kg

Awards: TV approved, meets and exceeds the new Trailer Type Approval legislation being enforced as of October 2012.

Daxara 218.4 Trailer, robustness commercial use trailer, with ‘A’ frame drawbar

daxara-218.4-trailer

Daxara 218.4 Trailer

* Please ring for prices * Mike on 07860 452421 

Description

The Daxara 218.4 Trailer is the first Daxara trailer with a useable space that exceed 6ft x 4ft and still features the reinforced ‘A’ frame drawbar and 13 inch wheels. It is constructed from galvanised steel for strength and longevity and has a gross weight capacity of 750kg.

The reinforced ‘A’ frame and double skin side panels further increase the robustness of the trailer and make it durable enough for more regular commercial use. As with all the Daxara trailers the rear panel/tailgate is removeable and along with the tipping feature allows for easier unloading of materials such as sand, gravel and earth. In addition to this the front panel opens and can also be removed on the Daxara 218.4 trailer.

Another useful feature is the recessed lights on the back of the trailer which help protect the lights from getting knocked and damaged.

The versatility of this great trailer can be further enhanced by adding any of the accessories shown below. Buying a spare wheel and spare wheel support should be seriously considered when buying a trailer, especially if you intend to use the trailer on long journeys.

Finally, the 218.4 box trailer as with all Daxara trailers meets and exceeds the new type approval legislation being enforced as of October 2012. As a result each trailer produced to these standards has to be supplied with a Certificate of Conformity, an example of this certificate is included with the trailer images above.

Please note: Trailer shown with optional rear prop stands fitted. Available separately, please see accessories listed below.

Technical Specification:
Overall dimensions: 305 x 175 x 96cm (LxWxH)
Internal box dimensions: 205 x 129 x 40cm (LxWxH)
External box dimensions: 211 x 135 x 48cm (LxWxH)

Wheel size: 145 R13 inch
Suspension: Torsion

Unladen Weight: 205kg
Gross weight: 750kg

Awards: TV approved, meets and exceeds the new Trailer Type Approval legislation being enforced as of October 2012.